Oxygen Generator Concentrator
Features:
- Use of an imported oxygen molecular sieve
- Oxygen output is stable and continuously
- High output pressure
- Working Voltage 110v/220v is available
- High concentrations up to 95%
- Silence low Db noise levels
Product Introduction:
Our Oxygen Generator/Concentrator is CE-certified. It utilizes air to convert it into highly concentrated oxygen.
Product Description:
Our oxygen Generator/Concentrator applies PSA technology (pressure swing adsorption) and provides a cost-efficient source of oxygen.
PSA Nitrogen Technology uses a molecular sieve to absorb the oxygen. It operates on the principle of rapid pressure swing adsorption of atmospheric nitrogen onto CMS (Carbon Molecular Sieve) at higher pressure.
The PSA Oxygen Generators/Concentrators work the same as the Nitrogen PSA Generators/Concentrators, with one exception: The absorption media inside is Zeolite.
Compressed air is fed into the absorption onto the Zeolite surface, and the Oxygen passes through with the desired purity. This technology is very efficient and saves you money.
It’s safe, more economical, and convenient to use, and it is widely used in agriculture, pharmaceutical production, water treatment, glass manufacture, and ozone production.
Characteristics:
Comes in 50 or 60 Hz models.
- PSA technology with imported oxygen molecular sieve
- 304 stainless steel housing, atmospheric and sleek, durable;
- High conversion efficiency, low energy consumption, long service life;
- High concentration up to 96%, stable and continuously working
- Silence working, low noise
- Plug and play
| Equipment | Model | Dimensions cm inches | Net weight Kg/lbs | Power | Gas source | Oxygen flow rate L/Gal |
|---|---|---|---|---|---|---|
| Oxygen Generator/Concentrator (Inner built in air filter+ condenser+ oil free compressor) | Pur-3L | 50*40*53 19.7*15.7*20.9” | 24kg/53lbs | 450W | Built in gas source | 1-3L/min |
| Pur-5L | 50*40*63 19.7*15.7*24.8” | 29kg/64lbs | 600W | 3-5L/min | ||
| Pur-8L | 50*40*73 19.7*15.7*28.7” | 30kg/66lbs | 700W | 5-8L/min | ||
| Pur-10L | 52*37*105 20.5*14.6*41.3” | 35kg/77.2lbs | 1000W | 10-12L/min | ||
| Pur-20L | 52*37*110 20.5*14.6*43.3” | 42kg/93lbs | 2000W | 20-25L/min | ||
| Pur-30L | 81.5*50*125 32.1*19.7*49.2” | 85kg/187.4lbs | 3000W | 30-38L/min | ||
| Pur-40L | TBD | 145kg/319.7lbs | 4000W | 40-50L/min |
Oxygen Generator/Concentrator - Frequently Asked Questions
Water Pollution & Wastewater Treatment With their unique ability to enrich dissolved oxygen in water and maintain it durably, Nano Bubbles significantly enhance aerobic biological treatment. They possess a distinctive negative electrostatic charge property, allowing them to absorb positively electrostatic-charged pollutants in water, facilitating efficient flotation separation. The simplicity of generating Nano Bubbles without heavy equipment, coupled with their high efficiency, not only saves time but also significantly reduces the operation cost of wastewater treatment, relieving potential financial burdens.
When working together with ozone, Nano Bubbles can produce ozone nanobubbles. These nanobubbles, while having the features of nanobubbles, also possess the features of Sterilization, Disinfection, & Decolorization, enhancing the overall efficiency of the wastewater treatment process.
- More dissolved oxygen in an aerobic process
- Better air flotation results in efficiency in the DAF system
- Decoloring without adding chemicals (textile wastewater, for example, with ozone)
- Better sterilization & disinfection result from ozone
We would highly suggest you use both, and one serves the purpose of getting rid of algae (Ultrasonic Algae Treatment), and the other will assist in the consumption of algae (Nano/Oxygen Combination)
You have two options: You can use an oxygen bottle you purchase locally (a continuing expense) or an oxygen generator/concentrator. Nanobubbles are produced by drawing oxygen from one or the other.
Results are dependent on too many factors. Customers have seen results in smaller bodies of water within days, some medium-sized bodies with fewer contaminants within weeks and sometimes it takes a few more weeks. However, results will happen; remember, you put much oxygen into your water/wastewater body.
We cannot give you an exact time because each system is built to the specifications and quantities that your specific location requires. However, it is generally 30-45 days.
12 months